A Design Study in Centrifugal Steel Castings -
Accumulator Cylinder
Horizontal
Mold Rotation
The
cylindrical steel mold is supported on roller wheels at specific points along its
horizontal length. An electric motor spins the drive
wheel which transfers the rotary motion
to the mold, reaching spinning speeds greater than 1000 rpm.
Rotational
speeds are calculated against the radius of the mold and the
weight of the casting.
The speed is set to pick up and hold the molten metal against
the mold wall through the full rotation without liquid slippage on
the wall or dropping ("raining") at the top of the rotation.