Choose one of the search tabs below, enter the desired search criteria and click “Search” to find matching alloy grades in our database.

Notice: This facility is in its beta test stage, and is provided for convenience.
Search results provided are subject to both human and machine errors and you should not rely on the information provided here without confirming it against the applicable standards and specifications.

Mechanical

Standards specify either a minimum or a range of mechanical properties. Your entered value(s) must be equal to or higher than the minimum or within the range of mechanical properties specified for a grade in a standard to have a match result.
You can search tensile strength (UTS), yield strength (YS), impact toughness, and rupture strength in Metric (SI) or Imperial System. You only need to input value using one unit and your entered value will automatically be converted to the other unit.

Hardness BHN HBW HRC
Tensile strength ksi or MPa
Yield strength ksi or MPa
Elongation%
Reduction in area%
Impact Foot-pounds or Joules
Impact test temperature in °F or °C
Stress rupture test ksi or MPa
100 hour rupture test MPa at temperature in °C (Optional)

Chemistry

All values are in weight percent (wt%)
Standards specify either a maximum or a range of wt% for various elements. Your entered value(s) must be equal to or lower than the maximum or within the range of wt% of elements specified for a grade in a standard to have a match result.
Elements that are specified as “Others” in a standard are not included in the search algorithm. To see these “Other” elements of a certain grade, click the page for that specific grade (either shown in the search results or by going to the other tabs e.g. By Standard)

Al% As% Ba% Bi% B% C% Co% Cr% Cu% Mn% Mo% N% Nb% Ni% P% S% Sb% Se% Si% Sn% Ta% Ti% V% W% Zr%

Select specification Include*: Tensile Strength Yield Strength Elongation/Reduction

*Note: data columns will only display if that data exists in the search results.

Select microstructure Include*: Tensile Strength Yield Strength Elongation/Reduction

*Note: data columns will only display if that data exists in the search results.

Please note that search results may be incomplete due to lack of available data on alloy microstructure types.

Select UNS Include*: Tensile Strength Yield Strength Elongation/Reduction

*Note: data columns will only display if that data exists in the search results.

Select Wrought Equivalent Include*: Tensile Strength Yield Strength Elongation/Reduction

*Note: data columns will only display if that data exists in the search results.