You are bidding on a 1928 How To Run A Lathe Booklet Edition No 27 Screw Cutting. I ship worldwide and combine shipping. Please visit my store for many more quality items.
Atlas 2915 Drill Grinding Attachment Instruction & Parts Manual 0022
Manual Description: Number of Printed Pages: 8 This is a reproduction of an original Atlas Operating Instructions for a No. 2915 Drill Grinding Attachment. This manual contains 7 pages on operating instructions and 1 page on parts. Simply put, if you have this attachment, you need this manual. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.Visit our eBay Store!We have over 1,100 manuals available. From our shop to yours. We get this. But you get this! Why settle for anything less?We can’t make pictures a lot better than the original, but we can fix everything else. Shipping: We ship every M-T-W-T-F except US holidays. All of our manuals are shipped with Delivery Confirmation. We stamp “Do Not Bend” on them to ensure that your manual arrives quickly in good condition. Any package that weighs more than 15.9 oz cannot be shipped First Class, and will be shipped Media Mail. Priority and Express mail options are available to purchase. Since we offer free shipping, we cannot reship manuals for free, due to inaccurate or insufficient addresses. Reshipping Fees for inaccurate or insufficient addresses: $5.00 for the first manual and $2.50 for each additional manual. Service: We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. We try to take care of all our customers. We do more than sell manuals, we have a complete woodworking and machine shop. We operate all kinds of machinery everyday.
1938–TURRET LATHE TOOLS-Catalog & Manual #38A –Warner and Swasey Orig
Recent estate purchase. Good condition. No writing in the book. Please let me know if you have any questions.
1938–TURRET LATHE TOOLS-Catalog & Manual #38–Warner and Swasey – VERY GOOD
This Book is in Very Good Condition Especially for Age. Clean Copy with Light Amount of Wear with Name Written First Page is only Marking. See Photos for Condition. Ships Same Day or Next with Tracking.
Monarch 10″ EE Lathe 1940’s Operator and Parts Manual
–> Description –> Monarch 10″ EE Lathe 1941 – 1949 Tube Lathe (No Schematic. I have had a lot of this version of the 10ee manual. None had a schematic ) 3HP motor Serial number EE-41007 Operator, Parts 36 pages The following information was provided by timeghost he does a MUCH better job explaining the tube portion of these machines……. “10EEs were being built during WW2. Material and component shortages caused the design of 10EEs to vary from month to month. In 1941, the massive hydraulic/hydrostatic variable-speed unit manufactured by Sundstand that provided the variable speed drive for 10EEs up to that time was replaced by a three-phase AC motor driving a 3 HP DC generator which provided power for an electronic variable-speed DC motor for the lathe. These are today referred to as, the “Motor-Generator” drive units. There are many of these still around for sale in the used machinery marketplace. The manual, EE – 41007, RI 01075, 127-126165, covers this type of drive system.” THIS MANUAL ” In 1949, the three-phase AC motor-DC generator drive system was replaced by a WiaD (Works in a Drawer) system that used electronic-tube controlled thyratrons to rectify AC current to a variable DC voltage to drive the lathe’s DC motor. Many vacuum tubes were used to control the rectifier tubes and other functions. This “works in a drawer” set-up is described by the vacuum tube schematic that you included in my purchase. Through the 1950s, the WiaD drive was redesign and improved.” Our Manual … https://www.ebay.com/itm/176379703255 “In 1960, the WiaD drive was replaced by fitting the 10EE with a more powerful 5 HP DC motor and a “module drive” that used an all-solid-state electronic module to control the electronic components, with the exception of the thyratrons. This is the motor control system that is covered in the EE-51891 manual that I purchased from you. This is the motor drive system I wanted an electronic schematic for, which is contained in the manual. There were around 3,000 10EE lathes sold with this drive system.” Our Manual. https://www.ebay.com/itm/175617101951 YOU GET A COPY AND A EMAILED PDF! You are getting one Brand New Clean copy of this manual. See below on how we reproduce. How We Reproduce our Manuals WATERMARKS! Sorry but do to thieves, some pages will be discreetly watermarked to deter this behavior. We stand behind our manuals and guarantee their quality. Every manual is carefully reproduced using Adobe software to make sure we get it right! The manuals are reprinted on high quality paper using both the front side and the back in FULL COLOR, then spiral wire bound together with a clear plastic cover and colored hard plastic back! Making sure you get the highest quality reproduction available! –> Email, Ship It or BOTH We here, at Rebuilt Machinery understand you need your manual, NOW! So, we offer different options. For the one price above you are entitled to printed copy and a COMPLEMENTARY PDF scanned copy. We can usually turn your scan PDF copy over to you within 24 hours of placing your order, provided you gave us email address at check out, so you can get right back to working on your machine while you wait on your quality reproduction to be received in the mail. You need your PDF ASAP and we understand it! Your order is our PRIORITY! Then we can mail you one of our quality reproductions. Also, however if you don’t need the reproduction or just don’t want to pay the shipping, let us know at checkout and we can reimburse you the shipping cost. Lastly, please note, that the COMPLIMENTARY PDF will have a watermark near the bottom portion of every page that cant be removed. The permanent manual, that is mailed to you does not have this. WORLDWIDE SHIPPING Yes, we only have shipping posted for the continental United States. However, we are more then happy to ship any where in the world, just ask us for a quote. COMBINDED SHIPPING Yes, we COMBINE shipping. However, in the checkout cart of eBay it does not always catch it when buying multiple items from our store. If you want to know exactly what the charge will be, please ask before checkout. Otherwise, we usually catch this and refund the difference. If not, please ask. PAYMENT We accept PayPal, Credit Cards and Wire Transfers. This means you can rest assured your order will be shipped to you ASAP after your purchase. For your security we only ship your order to the address you provide us via PayPal. CONTACT __Rebuilt_Machinery__ –> This template was built, designed and is the property of Rebuilt Industrial Machinery Copyright 2023 v1.6
Monarch 10″ EE TUBE Lathe 1950’s Schematic Manual
–> Description –> Monarch 10″ EE Lathe 1950’s Tube Lathe Schematic ONLY 3HP motor 1 page The following information was provided by timeghost he does a MUCH better job explaining the tube portion of these machines……. “10EEs were being built during WW2. Material and component shortages caused the design of 10EEs to vary from month to month. In 1941, the massive hydraulic/hydrostatic variable-speed unit manufactured by Sundstand that provided the variable speed drive for 10EEs up to that time was replaced by a three-phase AC motor driving a 3 HP DC generator which provided power for an electronic variable-speed DC motor for the lathe. These are today referred to as, the “Motor-Generator” drive units. There are many of these still around for sale in the used machinery marketplace. The manual, EE – 41007, RI 01075, 127-126165, covers this type of drive system.” OUR MANUAL https://www.ebay.com/itm/186443853520 ” In 1949, the three-phase AC motor-DC generator drive system was replaced by a WiaD (Works in a Drawer) system that used electronic-tube controlled thyratrons to rectify AC current to a variable DC voltage to drive the lathe’s DC motor. Many vacuum tubes were used to control the rectifier tubes and other functions. This “works in a drawer” set-up is described by the vacuum tube schematic that you included in my purchase. Through the 1950s, the WiaD drive was redesign and improved.” This Schematic (If you need the manual the one above is a good match) “In 1960, the WiaD drive was replaced by fitting the 10EE with a more powerful 5 HP DC motor and a “module drive” that used an all-solid-state electronic module to control the electronic components, with the exception of the thyratrons. This is the motor control system that is covered in the EE-51891 manual that I purchased from you. This is the motor drive system I wanted an electronic schematic for, which is contained in the manual. There were around 3,000 10EE lathes sold with this drive system.” Our Manual. https://www.ebay.com/itm/175617101951 YOU GET A COPY AND A EMAILED PDF! You are getting one Brand New Clean copy of this manual. See below on how we reproduce. How We Reproduce our Manuals WATERMARKS! Sorry but do to thieves, some pages will be discreetly watermarked to deter this behavior. We stand behind our manuals and guarantee their quality. Every manual is carefully reproduced using Adobe software to make sure we get it right! The manuals are reprinted on high quality paper using both the front side and the back in FULL COLOR, then spiral wire bound together with a clear plastic cover and colored hard plastic back! Making sure you get the highest quality reproduction available! –> Email, Ship It or BOTH We here, at Rebuilt Machinery understand you need your manual, NOW! So, we offer different options. For the one price above you are entitled to printed copy and a COMPLEMENTARY PDF scanned copy. We can usually turn your scan PDF copy over to you within 24 hours of placing your order, provided you gave us email address at check out, so you can get right back to working on your machine while you wait on your quality reproduction to be received in the mail. You need your PDF ASAP and we understand it! Your order is our PRIORITY! Then we can mail you one of our quality reproductions. Also, however if you don’t need the reproduction or just don’t want to pay the shipping, let us know at checkout and we can reimburse you the shipping cost. Lastly, please note, that the COMPLIMENTARY PDF will have a watermark near the bottom portion of every page that cant be removed. The permanent manual, that is mailed to you does not have this. WORLDWIDE SHIPPING Yes, we only have shipping posted for the continental United States. However, we are more then happy to ship any where in the world, just ask us for a quote. COMBINDED SHIPPING Yes, we COMBINE shipping. However, in the checkout cart of eBay it does not always catch it when buying multiple items from our store. If you want to know exactly what the charge will be, please ask before checkout. Otherwise, we usually catch this and refund the difference. If not, please ask. PAYMENT We accept PayPal, Credit Cards and Wire Transfers. This means you can rest assured your order will be shipped to you ASAP after your purchase. For your security we only ship your order to the address you provide us via PayPal. CONTACT __Rebuilt_Machinery__ –> This template was built, designed and is the property of Rebuilt Industrial Machinery Copyright 2023 v1.6
Okuma Pub. P-K762-002-E Op. & Maintenance Manual for OSP700L CNC Crown Lathe
Okuma publication P-K762-002-E operation & maintenance manual for OSP700L CNC Crown lathe. Hard copy, from a closing industrial facility.Note: This price is for one unit even though multiple are pictured.
South Bend Lathe Works Manuals Booklets Lot How to Run a Lathe Machinist 1942
How to Run a Lathe – 1942. – Oiling the Lathe – 1942. – Keep Your Lathe Clean – 1942. – The Installation and Leveling of the Lathe – 1942. – South Bend lathe owners. Sold as shown. The larger South Bend course book shows noticeable wear to the cover.
ATLAS-CRAFTSMAN 6″ Metal Lathe Model 3950, 10100, 101.21200 Parts Manual 0055
This manual will help you with setting up and running an Atlas Lathe. Mounting Lathe. ..1&2. We have been providing this service to fellow craftsman and machinist for over 20 years.