#2 and 3

Manual Description: Number of Pages: 50 This is a reproduction, not a photocopy, of an original Hardinge HC and HCT Chucking Lathes Parts Manual for chuckers with serial numbers after 100. We have an older version online as well. This manual contains excellent cross sectional view diagrams with descriptions of the parts for the many different versions of this great machine. This manual coves many different vintages of the Hardinge HC and HCT lathes as pictured below. We also have operator’s and maintenance manuals for the HC and HCT in our online store as well. Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.Visit our eBay Store!We have over 1,100 manuals available. From our shop to yours. We get this. But you get this! Why settle for anything less?We can’t make pictures a lot better than the original, but we can fix everything else. Shipping: We ship every M-T-W-T-F except US holidays. All of our manuals are shipped with Delivery Confirmation. We stamp “Do Not Bend” on them to ensure that your manual arrives quickly in good condition. Any package that weighs more than 15.9 oz cannot be shipped First Class, and will be shipped Media Mail. Priority and Express mail options are available to purchase. Since we offer free shipping, we cannot reship manuals for free, due to inaccurate or insufficient addresses. Reshipping Fees for inaccurate or insufficient addresses: $5.00 for the first manual and $2.50 for each additional manual. Service: We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. We try to take care of all our customers. We do more than sell manuals, we have a complete woodworking and machine shop. We operate all kinds of machinery everyday.

Manual Description:Number of Pages: 40, printed 5.5″ x 8.5″ This is a reproduction, not a photocopy, of an original Delta Getting the Most Out of Your Band Saw & Scroll Saw book. This is a complete handbook describing band saw and scroll saw operations in the home workshop with over two hundred photographic illustrations and line drawings. Please see index below. One reason that I’ve reprinted some of these older books is because they have a lot of information with illustrations that get directly to the point. This book is part of a series that we have on our site: GETTING THE MOST OUT OF YOUR SHAPER GETTING THE MOST OUT OF YOUR DRILL PRESS GETTING THE MOST OUT OF YOUR LATHE GETTING THE MOST OUT OF YOUR CIRCULAR SAW AND JOINTER GETTING THE MOST OUT OF YOUR ABRASIVE TOOLS GETTING THE MOST OUT OF YOUR BAND SAW AND SCROLL SAW Index CHAPTER ONE – —THE BAND SAW Types of Band Saws—, Construction, —Size Installation, —Power and Speed, —Guides —Tilting Table, —Sanding Equipment, —Height Attachment, —Table Guides, —Belt Guard—, Blade Fitting—, Adjusting Table, —Common Faults………………………4-8 CHAPTER TWO – —BAND SAW BLADES Dimensions—, Storage, —How to Fold—, Filing—, Cracks—, Setting, —Brazing……………9-11 CHAPTER THREE – —METHODS OF WORKING Position of Operator—, Fundamentals of Cutting—, Effect of Lead, —Ripping and Re- Sawing, —Use of Standard Fence, —The Ripping Blade, —Ripping Curves, —Tilt Table Operations, —Cutting-Off with Fence and Gage—, Use of Stop Rod—, Cut-off Block— sing Clamp Attachment, —Crosscutting Wide Stock—, Cutting Circles, —Jig Con struction—, Cutting Glue Blocks, —Round Corners—, Circular Rails, —Sanding, —Comp ound Band Sawing—, The Cabriole Leg, —Compound-Sawed Turnings, —Ornamental Work —Sawing in Multiple, —Ripping Thick Stock, —Split Dowels, —Tapering Jigs— Marking Turning Squares, —Pattern Sawing, —Beveled Curves, —Jig for Circular Arcs— Corner-Rounding Jig, —Spiral Dowels, —Ripping Pin—, Roller Supports………….12-26 CHAPTER FOUR – —METAL CUTTING Metal Cutting Blades—, Slow Speed Essential, —Cutting Thin Metal—, Methods of Clamping—, Clamping Round Material, —Sawing in Multiple…………………..27-29 CHAPTER FIVE – —THE SCROLL SAW Construction—, Size, —Power and Speed—, Universal Guide, —Table Adjustments— Special Chucks, —Belt Guard, —Scroll Saw Seat Blades—, Blade Racks—, Fitting Blades—, Adjusting Guide…………………………………………….30-34 CHAPTER SIX— – SCROLL SAW OPERATIONS Position of Operator—, Technique of Cutting, —Using Saber Blades, —Ripping Fence— Transferring Patterns, —Inlays—, Angle Sawing—, Paper Cutouts, —Cutting Cloth, —Cutting Metal, —Cutting Plastics, —Letters and Signs, —Circle Jig, —Tubular Joints, —Coped Joint………………………………………………..35-42 CHAPTER SEVEN— – SANDING AND FILING Standard Accessories—, Speed of Operation—, Table Inserts……………………43 APPENDIX Decimal Equivalents, —Scroll Saw Blade Chart, —Band Saw Blades—, File Sizes— Metal Cutting Band Saw Blades, —Board Measure—, Legs and Brackets—, Wood Letters —Wood Layouts…………………………………………………….44-48 Pictures from inside: Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.Visit our eBay Store!We have over 1,100 manuals available. From our shop to yours. We get this. But you get this! Why settle for anything less?We can’t make pictures a lot better than the original, but we can fix everything else. Shipping: We ship every M-T-W-T-F except US holidays. All of our manuals are shipped with Delivery Confirmation. We stamp “Do Not Bend” on them to ensure that your manual arrives quickly in good condition. Any package that weighs more than 15.9 oz cannot be shipped First Class, and will be shipped Media Mail. Priority and Express mail options are available to purchase. Since we offer free shipping, we cannot reship manuals for free, due to inaccurate or insufficient addresses. Reshipping Fees for inaccurate or insufficient addresses: $5.00 for the first manual and $2.50 for each additional manual. Service: We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. We try to take care of all our customers. We do more than sell manuals, we have a complete woodworking and machine shop. We operate all kinds of machinery everyday.

Manual Description: Number of Pages: 51 This is a reproduction, not a photocopy, of an original Hardinge HLV-H Lathe Service and Maintenance Manual. It covers the assembling and disassembling of the entire lathe, and it is done very well. The maintenance instructions in this manual are some of the best I’ve ever seen. Plain and simple, they don’t get any better than this. We have the Operator’s and Parts Manuals for this Hardinge HLV-H listed with the following titles: HARDINGE HLV-H High Speed Tool Room Lathe Operator’s Manual ’60 HARDINGE Older HLV-H Metal Lathe below serial #4999 Parts Manual Contents” Bed Lever-Removal……………………………….18 Replacement…………………………………….21 Belt-Adjustment, Replacement………………………5 Brake-Adjustment………………………………..21 Insert Replacement………………………………21 Solenoid and Spring Replacement…………………..22 Carriage-Apron Dissassembly………………………32 Apron Reassembly………………………………..36 Clutch Adjustment……………………………….37 Gear Rack Removal……………………………….40 Handwheel Disassembly…………………………..38 Lock Removal……………………………………37 Lubrication System……………………………..32 Collet Closer-Removal, Replacement…………………4 Coolant Facilities………………………………51 Cross Slide-Removal……………………………..44 Feed Screw Nut Backlash Adjustment………………..44 Feed Screw, Disassembly………………………….45 Feed Screw, Assembly…………………………….47 Drive Feed Screw Nut-Removal……………………..26 Replacement…………………………………….27 Electrical, Connections…………………………..3 Control Functions……………………………….51 Power Feed Control Panel…………………………30 Gear Box-Removal…………………………………9 Disassembly…………………………………….10 Assembly and Replacement…………………………15 Gib Adjustments…………………………………40 Headstock-Removal……………………………….17 Replacement…………………………………….18 Installation Instructions…………………………3 Lead Screw-Removal……………………………..38 Lead Screw Nut-Removal…………………………..39 Replacement…………………………………….40 Lubricants and Sealer……………………………51 Lubrication-Apron and Clutches……………………31 Carriage……………………………………….31 Cross Slide…………………………………….44 Drive………………………………………….22 Gearbox…………………………………………9 Headstock Bearing……………………………….16 Tool Post Slide…………………………………44 Power Feed Drive-Removal, Disassembly……………..28 Preventive Maintenance……………………………2 Speed Change Mechanism-Removal, Disassembly………..23 Assembly and Replacement………………………24,26 Serial Number…………………………………..47 Spindle Collet Key………………………………17 Spindle-Lock Pin……………………………….16 Limit Switch Replacement…………………………16 Tailstock-Disassembly……………………………47 Assembly……………………………………….49 Alignment………………………………………51 Tool Post Slide-Disassembly…………………….40 Assembly……………………………………….44 Feed Screw Nut Adjustment………………………..44 Variable Speed Pulley and Countershaft-Removal……..27 Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.Visit our eBay Store!We have over 1,100 manuals available. From our shop to yours. We get this. But you get this! Why settle for anything less?We can’t make pictures a lot better than the original, but we can fix everything else. Shipping: We ship every M-T-W-T-F except US holidays. All of our manuals are shipped with Delivery Confirmation. We stamp “Do Not Bend” on them to ensure that your manual arrives quickly in good condition. Any package that weighs more than 15.9 oz cannot be shipped First Class, and will be shipped Media Mail. Priority and Express mail options are available to purchase. Since we offer free shipping, we cannot reship manuals for free, due to inaccurate or insufficient addresses. Reshipping Fees for inaccurate or insufficient addresses: $5.00 for the first manual and $2.50 for each additional manual. Service: We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. We try to take care of all our customers. We do more than sell manuals, we have a complete woodworking and machine shop. We operate all kinds of machinery everyday.

Manual Description: Number of Pages: 40 This is a reproduction, not a photocopy, of an original Hardinge Model HC & HCT Chucking Machine Service and Maintenance Manual. This manual contains maintenance, and lubrication. Please see the contents below. Index Belts—Adjustment……………………………………..3 Replacement…………………………………………3 Brake, Spindle………………………………………5 Adjustment………………………………………….5 Insert Replacement…………………………………..5 Solenoid Replacement…………………………………5 Spring Replacement…………………………………..6 Carriage—Clutch and Gearbox Lubrication………………..24 Disassembly………………………………………..26 Gib Adjustment……………………………………..24 Handwheel Disassembly……………………………….35 Lock Removal……………………………………….26 Lubrication……………………………………..24,34 Rack Removal……………………………………….33 Reassembly…………………………………………31 Collet Closer—Removal………………………………..36 Replacement………………………………………..36 Coolant Facilities………………………………….37 Cross Feed Screw and Dial—Removal……………………..32 Replacement………………………………………..33 Drive—Brake Adjustment……………………………….12 Cartridge—Removal……………………………………10 Disassembly………………………………………..10 Replacement………………………………………..11 Feed Screw Nut—Removal……………………………….11 Replacement………………………………………..12 Lubrication…………………………………………6 Micro Switch……………………………………….12 Pulleys and Shaft Assembly Removal……………………14 Speed Change Mechanism—Removal…………………………6 Replacement…………………………………………8 Speed Change Motor, Brake and Vertical Screw Disassembly…6 Speed Change Motor Disassembly………………………..9 Electrics—Main Switch Case……………………………38 Power Feed Control Panel…………………………….17 Variable Speed Control Panel…………………………12 Headstock— Removal…………………………………..36 Replacement………………………………………..37 Lubricants and Sealer……………………………….39 Maintenance, Preventive………………………………2 Power Feed—Control Panel……………………………..17 Drive……………………………………………..15 Lubrication………………………………………..14 Spindle—Limit Switch…………………………………36 Lock Pin…………………………………………..36 Lubrication………………………………………..36 Turret and Cross Slide………………………………18 Removal……………………………………………18 Replacement………………………………………..18 Disassembly………………………………………..19 Feed Screw Nut—Removal……………………………….24 Replacement………………………………………..24 Adjustment…………………………………………24 Gib Adjustment……………………………………..19 Index Lever and Lock—Disassembly………………………21 Reassembly…………………………………………23 Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.Visit our eBay Store!We have over 1,100 manuals available. From our shop to yours. We get this. But you get this! Why settle for anything less?We can’t make pictures a lot better than the original, but we can fix everything else. Shipping: We ship every M-T-W-T-F except US holidays. All of our manuals are shipped with Delivery Confirmation. We stamp “Do Not Bend” on them to ensure that your manual arrives quickly in good condition. Any package that weighs more than 15.9 oz cannot be shipped First Class, and will be shipped Media Mail. Priority and Express mail options are available to purchase. Since we offer free shipping, we cannot reship manuals for free, due to inaccurate or insufficient addresses. Reshipping Fees for inaccurate or insufficient addresses: $5.00 for the first manual and $2.50 for each additional manual. Service: We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. We try to take care of all our customers. We do more than sell manuals, we have a complete woodworking and machine shop. We operate all kinds of machinery everyday.