The Welding Superstore Our eBay Store About Us Contact Us Add to Favorite Sellers Please note the shipping delivery estimate before placing your order! CK Worldwide Part # AMTCM The Amptrak remote current control provides remote on-off control of the welding machine contactor and/or gas and water solenoid control, as well as full range remote current output control. A built in strain relief prevents the control cord from being pulled out or damaged. The Amptrak remote current control can be ordered built into a CK torch handle as original equipment or in the Hook and Loop model where one size fits all. . Linear slide actuator for complete on/off and full amperage control. Built in handle or Hook and Loop strap design to fit all TIG torches. Adapts to most standard TIG power supplies. Protected against high frequency. Package of 1 Amperage Control Length: Attachment Type (refer below): Medium BUILT-IN HANDLE FOR CK TORCHES ATTACHMENT TYPE Small: CK9, CK17, CK20, CK24, CK24W, CK80, CK90, CK100, CK130, CK150, CKC150*, CK200,CKT200, FLEX-LOC* (*Only Hook and Loop will fit Valved CKC150s and Flex-Locs) Medium: CK230, CKA10, CKA20, TL18, TL26, TL210, TL305 Large: CK18, CK26, CK210, CK300, CK350, CK515 Hook and Loop Models: One Size fits all handle diameters and retrofits easily to all makes and models.
Di-Acro 16-36 18-48 & 20-72 Hydra-Power 12T Press Brake Parts & Operator Manual
This is in good used condition. Shipping is free within US 48 States. Email me with any other questions you may have. Thanks for looking and good luck!!!!!!! lb
Lodge & Shipley 18″ 20″ 22″ Selective Head Lathe Operator Instruction Manual
S/N Covered in this Manual This is in good used condition.
McILVANIE MACHINE WORKS CENTURY LATHE Catalog Book Model B 16 18 20″ Geared Head
The book provides detailed information on the Century Lathe, including its history, design, and functionality. It covers all aspects of the machine, from the geared head to the various tools and accessories that can be used with it.
Lodge & Shipley 18, 20 & 22 Inch Lathes with Large Hole thru Spindle Circular
These aren’t advertised as “Oil-country” lathes, they’re advertised as machines made for “unusual work”. The 18″ lathe had a 5″ thru hole, the 20& 22″ lathe had a 8.56″ thru hole! Unique machine for unique work.
Sebastian 12″ 14″ 18″ & 20″ Engine Lathe Parts Catalog Manual No. 713 xz
This is in good used condition.
Millport SJ High Precision Lathe 16″ 18″ 20″ Owner Operator Manual User Guide
This is in good used condition.
Niagara Overdrive Gap Shears Series 17-18-19-20 Op & Parts List Manual #1839
Niagara Overdrive Gap Shears Series 17, 18, 19, 20 Operator & Parts Manual. The manual has about28 pages. For Models : Overdrive Series 17, 18, 19, & 20. About this manual : This is a high quality reproduction manual which has been scanned with a high resolution scanner.
DASHIN SHARP MAJOR 18″, 20″, 22″ Metal Lathe Instructions & Parts Manual 1521
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find.
Sebastian 14″ 16″ 18″ & 20″ Gap Bed Lathe Parts Catalog Manual No. 713 xz
This is in good used condition.