Copied and In a Binder Daewoo F10T-F Programming Manual *FREE SHIPPING*

//  Leave a Comment

Copied and In a Binder Daewoo F10T-F Programming Manual *FREE SHIPPING* FOR YOUR CONSIDERATION: Copied and In a Binder Daewoo F10T-F Programming Manual All items come as shown. If it is included in this listing, it’s shown in the photos. Please check them carefully Location: NC Skid 1104 Box 5 PLEASE READ*We cannot guarantee that this part will fit your application, only an authorized dealership can do that. We have listed all model information that we have available. We strive to provide all information that we have on hand and do our best to describe and photograph every part. Please make sure that this is the correct part that you need BEFORE you buy. The best way to do this is to call a dealership and have them verify that this is the appropriate part number for your application.*THE FREE SHIPPING OFFER APPLIES TO THE CONTINENTAL UNITED STATES ONLY. RESIDENTS OF ALASKA, HAWAII AND PUERTO RICO WILL NEED TO EMAIL US FOR AN ACCURATE SHIPPING QUOTE * Los residentes de Puerto Rico y Hawái DEBEN enviar un correo electrónico para solicitar una cotización de envío antes de realizar la compra. NO realizamos envíos fuera de los Estados Unidos continentales de forma gratuita.TERMS The overwhelming majority of what we sell is surplus from large companies or governments. If we say the item works, then it was tested to the best of our ability. All items and contents are described to the best of our ability. We examine all items and supply all available make/model information. We will try to answer all questions in a timely manner.PAYMENT All payment is due immediately with the “Buy It Now” feature. All payments are processed for fulfillment immediately, through PayPal’s policy. If you pay by PayPal, we will ONLY ship to the PayPal confirmed or approved shipping address that you choose at the time of payment.SHIPPING & HANDLING For normal orders, orders ship between 1 to 3 business days after payment is made. We cannot control shipping time after we ship. Most items are shipped through USPS, with a tracking number. If an item ships via any other method, shipping/tracking information, as well as the carrier will be provided.INTERNATIONAL SHIPPING We do offer International (Worldwide) shipping. All international buyers will need to contact us with their shipping information for an accurate shipping quote prior to purchase.*RETURNS* We offer free returns on anything that arrives damaged or non-functional for 30 days after the date of receipt. We do not offer free returns if something doesn’t fit, or you changed your mind. In those cases, you will be required to pay for return shipping, as well as a return to stock fee. We do NOT accept returns on written/printed material or software/computer games. There are NO exceptions to this rule. Please be aware of that prior to purchase. Powered by SixBit’s eCommerce Solution

ATLAS Quick Gear Change Handbook for 10″ Metal Lathe Manual 0042

//  Leave a Comment

Manual Description: Number of Pages: 44 This is a reproduction of an original Atlas Quick Change Attachment Hand Book for a 10-inch lathes. I combined the charts on the same page while maintaining the original size, but I enlarged pages without charts so you can see all the details. So all 72 pages of the original manual are included. I have the 10-F Quick Change Installation Manual as well. Contents:Operating Instructions…………………………………………………1-5Lubrication Chart…………………………………………………………….6TABLE I — Gear Set-ups for Odd Threads and Feeds………….7-59TABLE II —Gear Set-ups for Metric Threads……………………..60Gear Set-ups for Coil Winding TABLES III – XII American Steel and Music Wire Gauge -TABLE III………………61-62Enamel Covered Magnet Wire -TABLE IV………………………….63American or Browne and Sharpe Wire Gauge -TABLE V………………………………………………..64-65Washburn and Moen or Steel Wire Gauge -TABLE VI………….66Double Cotton Covered Magnet Wire -TABLE VII………………67Single Cotton Covered Magnet Wire -TABLE VIII……………….68Double Silk Covered Magnet Wire -TABLE IX……………………69Single Silk Covered Magnet Wire -TABLE X………………………70Enamel and Single Cotton Covered Magnet Wire -TABLE XI……………………………………………..71Enamel and Single Silk Covered Magnet Wire -TABLE XII…………………………………………….72 Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.Visit our eBay Store!We have over 1,100 manuals available. From our shop to yours. We get this. But you get this! Why settle for anything less?We can’t make pictures a lot better than the original, but we can fix everything else. Shipping: We ship every M-T-W-T-F except US holidays. All of our manuals are shipped with Delivery Confirmation. We stamp “Do Not Bend” on them to ensure that your manual arrives quickly in good condition. Any package that weighs more than 15.9 oz cannot be shipped First Class, and will be shipped Media Mail. Priority and Express mail options are available to purchase. Since we offer free shipping, we cannot reship manuals for free, due to inaccurate or insufficient addresses. Reshipping Fees for inaccurate or insufficient addresses: $5.00 for the first manual and $2.50 for each additional manual. Service: We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. We try to take care of all our customers. We do more than sell manuals, we have a complete woodworking and machine shop. We operate all kinds of machinery everyday.

Atlas Craftsman Manual of Metal Lathe Operation Book for 10″ Standard 0033

//  Leave a Comment

Manual Description:Number of Pages: 252+12 dividers, printed 5.5″ x 8.5″ This is a reproduction, not a photocopy, of an original Atlas Craftsman-Sears Manual of Lathe Operation and Machinists Tables for 10-inch Standard Change Gear Lathe. This manual covers Atlas 10″ lathes that have a pull knob to engage power cross feed, copper-hardened babbitt and Timken bearings, and both vertical and horizontal motor drive systems. It covers everything shown in the index section listed below and more. This manual is printed in it’s original size 5.5″ x 8.5″. I carry 6 different Manual of Lathe Operation and Machinists Tables books that cover the Atlas Craftsman-Sears Lathes made past 1937 in my store.See “Which manual works with my lathe” section below for explanations. The Format This manual formatted with in introduction and then is broken down into 12 sections which vary in pages. The 12 sections are as follows: No.1 Lathe Care and Construction No.2 Theory of Metal Cutting No.3 Cutting Tools No.4 The Machining of Various Metals No.5 Holding the Work No.6 Drilling and Boring No.7 Thread Cutting No.8 Lathe Attachments and Their Uses No.9 Woodturning on the Metal Lathe No.10 Machinist Tables No.11 Index No.12 Pages For Your Shop Notes For your convenience, I have reprinted up six different original versions of this Manual of Lathe Operation book to cover the large span of lathes that Atlas produced from circa 1937 to the late 1900’s. Some of the manuals overlap on certain machines and parts, because Atlas didn’t change every machine and part at precise times, but I can help you match the appropriate manual with your machine. SEE “Which manual works with your lathe:” below. I am aware that there are original versions of this manual sold on eBay, but I am not trying to compete with those manuals. By many request, this collection of manuals was reproduced for my Atlas Craftsman-Sears customers. I am trying to provide a complete collection of manuals after years of research and processing, scanning, and cleaning over 1,500 pages from these 6 different manuals. I hope my effort helps you with locating the appropriate manual for operating your size and vintage of lathe. Example Pictures from various Lathe Operation Manuals: Which manual works with your lathe: I have six different manuals in my store that cover different vintages/models and sizes of Atlas Craftsman-Sears lathes. Some of the manuals overlap on certain lathes and parts, because Atlas didn’t make changes to every machine and part at precise times. Below is an explanation of the six different manuals. If you have any questions about a manual, please let me know. Please note: The pictures are given to show a general idea of the models covered in each manual. Please read the descriptions and characteristics of the lathes covered in each manual on the right. Manual Title: Atlas Craftsman Manual of Lathe Operation Old 10″ Gear Characteristics: 10″ Standard Gear Change Copper-hardened Babbitt and Timken Bearings No pull knob to engage power cross feed Vertical motor drive system only Manual Title: Atlas Craftsman Manual of Lathe Operation 10″ Standard Characteristics: 10″ Standard Gear Change Copper-hardened Babbitt and Timken Bearings Has a pull knob to engage power cross feed Vertical and Horizontal motor drive systems Manual Title: Atlas Craftsman Manual of Lathe Operation 10″ and 6″ Characteristics: 10″ Quick Change, 10″ Standard Gear Change 6″ Standard Gear Change Thread Chart Timken Bearings Only Has a pull knob to engage power cross feed Horizontal motor drive systems Only Manual Title: Atlas Craftsman Manual of Lathe Operation 12″ Older Style Characteristics: 12″ Standard Gear Change, 12″ Quick Gear Change Copper-hardened Babbitt and Timken Bearings Has a pull knob to engage power cross feed Horizontal and Vertical motor drive systems Manual Title: Atlas Craftsman Manual of Lathe Operation 12″ Crossfeed Pull-Knob Characteristics: 12″ Quick Gear Change, 12″ Standard Gear Change Timken Bearings Only Has a pull knob to engage power cross feed Bench and Cabinet Models Manual Title: Atlas Craftsman Manual of Lathe Operation 12″ Crossfeed Lever Characteristics: 12″ Quick Gear Change 12″ Standard Gear Change Timken Bearings Only Has a lever to engage power cross feed Bench and Cabinet Models Pictures for explanation of power cross feed NO Knob or Lever Knob Lever Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.Visit our eBay Store!We have over 1,100 manuals available. From our shop to yours. We get this. But you get this! Why settle for anything less?We can’t make pictures a lot better than the original, but we can fix everything else. Shipping: We ship every M-T-W-T-F except US holidays. All of our manuals are shipped with Delivery Confirmation. We stamp “Do Not Bend” on them to ensure that your manual arrives quickly in good condition. Any package that weighs more than 15.9 oz cannot be shipped First Class, and will be shipped Media Mail. Priority and Express mail options are available to purchase. Since we offer free shipping, we cannot reship manuals for free, due to inaccurate or insufficient addresses. Reshipping Fees for inaccurate or insufficient addresses: $5.00 for the first manual and $2.50 for each additional manual. Service: We have been providing this service to fellow craftsman and machinist for over 20 years. We treat everyone as we would like to be treated. We try to take care of all our customers. We do more than sell manuals, we have a complete woodworking and machine shop. We operate all kinds of machinery everyday.