sfsa_s.gif (4934 bytes) amc.gif (6172 bytes)

afs.gif (3195 bytes)
A Design Study in Centrifugal Steel Castings - Accumulator Cylinder                                  

Summary 
Hydraulic Accumulator for Navy Submarines

  • Spuncast has been producing the accumulator cylinder as a duplex stainless steel centrifugal casting for over six years, supporting repeated retrofit buys from the Navy and shipyard contractors. 

  • Centrifugal duplex steel castings save money, improve reliability, and reduce down-time in this application.

For further information on centrifugal casting of steel and iron alloys, contact -- 
Alan Holtz at Spuncast, Inc.  Phone-- 920-261-7853
E-mail -- aholtz@spuncast.com   Web Site = http://www.spuncast.com

Acknowledgment   --
The metalcasting design studies are a joint effort of the
Steel Founders' Society of America and the American Foundry Society.
Project funding was provided by the American Metalcasting Consortium Project, which
is sponsored by the Defense Logistics Agency, Attn: DLSC-T, Ft. Belvoir, VA, 22060-6221


Back

STOP.jpg (1496 bytes)

26
 
Copyright 2004  by the Steel Founders' Society of America   All rights reserved. 
Address comments to: blairr@sfsa.org
Last Modified:March, 2004 by STG

arrow_top.gif (1191 bytes)
Page 1

 In cooperation with
 Spuncast, Inc.